Our WATERJET Systems utilize ultra-high water pressure (55,000 pounds per square inch) forced through a nozzle as small as 0.004 inches in diameter.
The high velocity speed of the WATERJET (up to 3,000 feet per second) can cut a variety of metallic or non-metallic materials such as stainless steel, felt, rubber, graphite, fiberglass, titanium and many more! The materials are cut quickly, cleanly and economically. The CNC Controlled System has dual, two axis heads. Advantages of the WATERJET System are as follows:
Good quality edges... no heat-affected zones
Low material loss
Omnidirectional: straight and contour cutting
No material work hardening
WaterJet Equipment
ESAB GXA GANTRY with Autopath Control capacity - 72" X 96"
ESAB GXB GANTRY with Autopath Control capacity 72" X 160"
ESAB GXA GANTRY with Optipath Control capacity - 72" X 144"
FLOW 6-X 40-K Single Intensifier
FLOW 9-X 55-K Dual Intensifier
FLOW 9-X 55-K Single Intensifier
FLOW 11-X 55-K Dual Intensifier
Each gantry is fitted with dual heads.
Purchased first FLOW WATERJET CUTTING SYSTEM in August, 1989.
Second system was added in 1992 and third in July, 1993
Types of WaterJet Work
Extensive cutting of titanium for the orthopedic industry
Cutting of irregular shaped blanks for nameplates
Cutting of television picture-tube faceplates (glass)
Cutting of 2" thick X 15" high marble penguins for a cemetery grave marker
Extensive lettering and signage for the sign industry
Welcome to Luick Quality Gage
At Luick Quality Gage, we pledge to provide quality tooling and parts that meet or exceed our customer's requirements.
ISO 9001:2000 Registered - Numerous customer quality awards
